You have no items in your shopping cart.
Close
Search
Filters

170L 3 Vessels HERMS Brewing system

Availability: Out of stock
$12,800.00

This is high-quality 170L HERMS Brewing System/ BrewHouse made from manufacturer for commercial brewery equipment.

HERMS system is a well-known technology which used for brewing craft beer. To compare with infustion mashing system, HERMS system has a complicate operating process with more requirements for equipment, but it can produce high-quality craft beer with more profile than infusion method with high yield and efficiency of brewing. HERMS can easily reach step mashing requirements without too much operation but just change the temperature setting as you want. You can start mash in temperature from something around 40C and mash out as high as 78C, while it's almost not possible for an infusion brewing system.

This system has all fittings and control systems to reach the desired function by turn on/turn off the valves in front of the vessels and direction of flow between hot water and wort, and in the end you can reach the different result you want.

The whole brewhouse was heated by 2 x 9KW heat elements which drove by 3 phase power with 2 wort pump and controlled in a control cabinet just stand by the brewhouse.

With reasonable heat exchange and management, you will save a lot of energy for cooling and heating especially if you run double batch or triple batch. With separate vessels, you can also save times by reduce pre-heat times.
Specification:
Made of High Standard SS304 for all material contact brew(not the skid)
170L gross volume for the vessel
2 x 370W wort pump
2 x 380v/9KW Heat Elements

We got 1 of this brewery in stock

This is high-quality 170L HERMS Brewing System/ BrewHouse made from manufacturer for commercial brewery equipment.

HERMS system is a well-known technology which used for brewing craft beer. To compare with infustion mashing system, HERMS system has a complicate operating process with more requirements for equipment, but it can produce high-quality craft beer with more profile than infusion method with high yield and efficiency of brewing. HERMS can easily reach step mashing requirements without too much operation but just change the temperature setting as you want. You can start mash in temperature from something around 40C and mash out as high as 78C, while it's almost not possible for an infusion brewing system.

This system has all fittings and control systems to reach the desired function by turn on/turn off the valves in front of the vessels and direction of flow between hot water and wort, and in the end you can reach the different result you want.

The whole brewhouse was heated by 2 x 9KW heat elements which drove by 3 phase power with 2 wort pump and controlled in a control cabinet just stand by the brewhouse.

With reasonable heat exchange and management, you will save a lot of energy for cooling and heating especially if you run double batch or triple batch. With separate vessels, you can also save times by reduce pre-heat times.
Specification:
Made of High Standard SS304 for all material contact brew(not the skid)
170L gross volume for the vessel
2 x 370W wort pump
2 x 380v/9KW Heat Elements

We got 1 of this brewery in stock

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent